Biolight Meditech S12 Vet - Using the Timer

S12 Vet Monitor User’s Manual
3-14 

3.7.5.2. Exit the Privacy Mode
The monitor automatically exits the privacy mode in any of the following situations:
 The monitor disconnects from the Central Monitoring System.
 The low battery alarm occurs.
You can also press 【Exit Privacy Mode】on the screen to manually exit the privacy
mode.
3.8. Using the Timer
The monitor provides timer function, which can display up to four timers at the same
time. You can set each timer separately, which prompts when the set time arrives.
3.8.1. Displaying Timer
To display a timer, follow this procedure:
1. Access【Screen Layout】in either of the following ways:
 Select【Screen Setup】quick key→Select【Screen Layout】submenu.
 Select【Main Menu】quick key→from the【Display】column to select
【Screen Layout】.
2. Click the parameter area where you want to display the timer, select 【Timer】
→ select【Timer1】,【Timer2】,【Timer3】,【Timer4】.
3.8.2. Controlling the Timer
The timer provides the following controls:
【Start】:Start the timer.
【Pause】:
Pause the timer.
【Resume】: Resume the timer.
【Reset】:
Clear the current timing results and reset the timer.
WARNING：
 Do not use the timers to schedule critical patient-related tasks.