EasyManua.ls Logo

Biolight Meditech S12 Vet - Hardware Specifications

Biolight Meditech S12 Vet
294 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S12 Vet Monitor User’s Manual
4
less than 8 hours when it is turned off.
When the monitor is turned on, it is charged to 90% for less than
11 hours and 100% for less than 12 hours.
Turn off delay
5 min-15minafter the low battery alarm first occurs
A.5 Hardware Specifications
A.5.1 Display
Host display
Type Color TFT LCD
S12 Vet
Sizediagonal
12.1 inch
Resolution 800×600 pixels
External display
Type TFT display
A.5.2 Recorder
Type
BTR50S thermal dot array
Paper width
50 mm±1mm
Recording speed
12.5 mm/s, 25 mm/s, 50 mm/s
Recording waveform
Maximum 3 tracks
A.5.3 Mainframe LED
Alarm lamp
Cyan, yellow and red
Power indicating lamp
1 (Green/Orange)
When powered with AC, it lights green while turn on and off
the monitor.
When powered with battery, the orange light is on when the
battery is turned on, and no light is on when the battery is
turned off.
Battery charging
1 (yellow), When charging, it is always on, and when it is fully

Table of Contents

Related product manuals