EasyManua.ls Logo

Biolight Meditech S12 Vet - 6.6. Freezing Waveforms

Biolight Meditech S12 Vet
294 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
S12 Vet Monitor User’s Manual
6-8
6.5. Big Font Screen
You can enter big numerics screen in either of the following ways:
SelectScreen Setupquick key→SelectScreen Selectsubmenu→Select
Big Font Screen.
SelectMain Menuquick key→fromDisplaycolumn to selectScreen
Select→SelectBig Font Screen.
In thesetting window of Big Font Screen, you can select 6 parameters to observe
according to your needs. For parameters with waveform, one waveform is displayed at the
same time.
6.6. Freezing Waveforms
During monitoring the patient, you can freeze the waveform on the screen and then
review it to carefully observe the patient during this time. You can also export the frozen
waveform through the recorder.
6.6.1. Entering Freezing Status
1. Under the non-freezing condition, selectFreezequick key, and then
pop-upFreezemenu.
2. All waveforms are frozen, that is, the waveforms are not refreshed. The data
in the parameter area is refreshed normally.
6.6.2. Waveform Review
On the freezing waveforms screen you can operate the following:
In the frozen status, you can select the control icon to browse the frozen
waveforms: the frozen waveform will move to the left or right correspondingly. At the
same time, each waveform is marked with a time scale, and the freezing time is recorded
as0s.As the waveform moves to the right, the time scale will be gradually changed to

Table of Contents

Related product manuals