Biolight Meditech S12 Vet - Temp

S12 Vet Monitor User’s Manual
39
Item Default Setting
NIBP Simul OFF
Sensitivity MED
Display PI ON
Waveform Speed 25 mm/s
PR Alarm switch ON
High limit 200 bpm
Low limit 100 bpm
Alarm priority MED
Alarm output OFF
Alarm source HR
PR source Auto
QRS volume 3
Tone modulation ON

C.4 TEMP
Item Default Setting
T1, T2 Alarm switch ON
High limit 38.0 ºC
Low limit 35.0 ºC
Alarm priority MED
Alarm output OFF
ΔT Alarm switch ON
High limit 2.0 ºC
Alarm priority MED
Alarm output OFF
Unit ºC