BK Precision 8500B Series - Handling Damaged Instruments; Cleaning Instructions

12
Status Commands
3.1 SSTATus:QUEStionable[:EVENt]? 12
3.2 STATus:QUEStionable:CONDition? 12
3.3 STATus:QUEStionable:ENABle <NRf+> 12
3.4 STATus:OPERation[:EVENt]? 13
3.5 STATus:OPERation:CONDition? 13
3.6 STATus:OPERation:ENABle <NRf+> 13
Those commands congure the status registers of the electronic load.
3.1 SSTATus:QUEStionable[:EVENt]?
This query returns the value of event register. Event register is read only register, it keeps all events sent to it. Read the
quest event register will clear it.
Query Syntax STATus:QUEStionable[:EVENt]?
Parameters None
Example STAT:QUES:EVEN?
Query Response <NR1>
Related Commands *CLS
3.2 STATus:QUEStionable:CONDition?
This command can read the parameter from quest condition register. It is a read only register, keep the real-time(not
locked) query status of the load.
Query Syntax STATus:QUEStionable:CONDition?
Parameters None
Example STAT:QUES:COND?
Returned
Parameters <NR1>
Related Commands STAT:OPER:COND?
3.3 STATus:QUEStionable:ENABle <NRf+>
This command is used to set the value of the enable register.
Command Syntax STATus:QUEStionable:ENABle <NRf+>
Parameters 0 to 32767
Example STAT:QUES:ENAB 32
Query Syntax STATus:QUEStionable:ENABle?
Query Response <NR1>