BK Precision 8500B Series - Front Panel Operation; 5.1 Key Functions Overview; 5.1.1 Function Keys

30
Query Syntax [SOURce:]DYNamic:HIGH[:LEVel]?
Query Response <NR2>
7.20 [SOURce:]DYNamic:HIGH:DWELl <NRf+>
This command is used to set the duration of high-level load current in dynamic mode.
Command Syntax [SOURce:]DYNamic:HIGH:DWELl <NRf+>
Parameters MIN MAX- MINimum- MAXimum
Unit
S
*RST Value
MIN
Example DYN:HIGH:DWELl 0.01
Query Syntax [SOURce:]DYNamic:HIGH:DWELl?
Query Response <NR2>
7.21 [SOURce:]DYNamic:LOW[:LEVel] <NRf+>
This command is used to set the low-level load current in dynamic mode.
Command Syntax [SOURce:]DYNamic:LOW[:LEVel] <NRf+>
Parameters MIN MAX- MINimum- MAXimum
Unit
A
*RST Value
MIN
Example DYN:LOW 1
Query Syntax [SOURce:]DYNamic:LOW[:LEVel]?
Query Response <NR2>
7.22 [SOURce:]DYNamic:LOW:DWELl <NRf+>
This command is used to set the duration of low-level load current in dynamic mode.
Command Syntax [SOURce:]DYNamic:LOW:DWELl <NRf+>
Parameters MIN MAX- MINimum- MAXimum
Unit
S
*RST Value
MIN
Example DYN:LOW:DWEL 1