BK Precision 8500B Series Programming Manual

24
Parameters 0 - 1 - OFF - ON
*RST Value OFF
Example INP:SHOR 1
Query Syntax INPut:SHORt?
Query Response 0 - 1
Related Commands INP
7.3 [SOURce:]FUNCtion <function> [SOURce:]MODE <function>
These two commands are equivalent and are used to select the input mode of the load.
Command Syntax [SOURce:]FUNCtion <function>
[SOURce:]MODE <function>
Parameters CURRent - VOLTage - POWer - RESistance- DYNamic - LED - IMPedance
• CURRent: Constant Current Mode
• VOLTage: Constant Voltage Mode
• POWer: Constant Power Mode
• RESistance: Constant Resistance Mode
• DYNamic: Dynamic Operation Mode
• LED: LED Mode
• IMPedance: Constant Impedance Mode
*RST Value
CURRent
Example MODE RES
Query Syntax [SOURce:]FUNCtion?
[SOURce:]MODE?
Query Response <CRD>
7.4 [SOURce:]VOLTage:RANGe <NRf+>
This command sets the voltage range of the electronic load module. When you program a range value, the load
automatically selects the range that corresponds to the value that you program. If the value falls in a region where ranges
overlap, the load selects the range with the highest resolution.
Command Syntax [SOURce:]VOLTage:RANGe <NRf+>
Parameters MIN MAX - MINimum - MAXimum
Unit
V
*RST Value

BK Precision 8500B Series Specifications

General

Brand	BK Precision
Model	8500B Series
Category	Test Equipment
Language	English