BK Precision 8500B Series - 4.3 Input Connection and Wiring; 4.3.1 Current Carrying Capacity

25
MAXimum(high range)
Example SOUR:VOLT:RANG MIN
Query Syntax [SOURce:]VOLTage:RANGe?
Query Response <NR2>
7.5 [SOURce:]VOLTage:RANGe:AUTO[:STATe]
This command is used to set the auto-range state of the voltage meter of the load module.
Command Syntax [SOURce:]VOLTage:RANGe:AUTO[:STATe] <bool>
Parameters 0 - 1 - ON - OFF
Query Response 1
Example VOLT:RANG:AUTO 1
Query Syntax [SOURce:]VOLTage:RANGe:AUTO[:STATe]?
Query Response <NR1>
7.6 [SOURce:]VOLTage:[LEVel:]ON <NRf+>
This command sets the voltage of sink current on.
Command Syntax [SOURce:]VOLTage[:LEVel]:ON <NRf+>
Parameters None
Unit
V
*RST Value
1
Example VOLT:ON 3
Query Syntax [SOURce:]VOLTage[:LEVel]:ON?
Query Response <NR2
7.7 [SOURce:]Voltage:[LEVel:]OFF <NRf+>
This command is used to set the load start unloading voltage value.
Command Syntax [SOURce:]VOLTage[:LEVel]:OFF <NRf+>
Parameters MIN MAX - MINimum - MAXimum
Unit
V
*RST Value
0.5
Example VOLT:OFF 2