BK Precision 8500B Series Programming Manual

15
Parameters None
Example MEAS:VOLT:PTP?
Query Response <NR2>
4.5 MEASure[:SCALar]:CURRent[:DC]?
This command is used to query the current average of the electronic load.
Command Syntax MEASure [:SCALar]:CURRent[:DC]?
Parameters None
Example MEAS:CURR?
Query Response <NR2>
4.6 MEASure[:SCALar]:CURRent:MAXimum?
This command is used to query the peak current of the electronic load.
MEASure[:SCALar]:CURRent:MAXimum?
MEAS:CURR:MAX?
<NR2>
4.7 MEASure[:SCALar]:CURRent:MINimum?
This command is used to query the minimum current of the electronic load.
Command Syntax MEASure[:SCALar]:CURRent:MINimum?
Parameters None
Example MEAS:CURR:MIN?
Query Response <NR2>
4.8 MEASure[:SCALar]:CURRent:PTPeak?
This command is used to query the current peak-to-peak value.
Command Syntax MEASure[:SCALar]:CURRent:PTPeak?
Parameters None
Example MEAS:CURR:PTP?
Query Response <NR2>
4.9 MEASure[:SCALar]:POWer[:DC]?
This command is used to query the power average.
MEASure [:SCALar]:POWer[:DC]?
MEAS:POWer?
<NR2>

BK Precision 8500B Series Specifications

General

Brand	BK Precision
Model	8500B Series
Category	Test Equipment
Language	English