BK Precision 8500B Series Programming Manual

58
12.54 Set/Read current falling slope. (B2H/B3H)
Byte Description
1 AAh
2 Address (0-31, 0XFF)
3 Command B2H/B3H
4-7 Current falling slope (Low byte to High byte order)
8-25 System reserve
26 Checksum
12.55 Set/Read the voltage upper limit in CC mode. (B4H/B5H)
Byte Description
1 AAh
2 Address (0-31, 0XFF)
3 Command B4H/B5H
4-7 The voltage upper limit in CC mode (Low byte to High byte order)
8-25 System reserve
26 Checksum
12.56 Set/Read the voltage lower limit in CC mode. (B6H/B7H)
Byte Description
1 AAh
2 Address (0-31, 0XFF)
3 Command B6H/B7H
4-7 The voltage lower limit in CC mode (Low byte to High byte order)
8-25 System reserve
26 Checksum
12.57 Set/Read the current upper limit in CV mode. (B8H/B9H)
Byte Description
1 AAh
2 Address (0-31, 0XFF)
3 Command B8H/B9H
4-7 The current upper limit (Low byte to High byte order)
8-25 System reserve
26 Checksum

BK Precision 8500B Series Specifications

General

Brand	BK Precision
Model	8500B Series
Category	Test Equipment
Language	English