BK Precision 8500B Series Programming Manual

63
12.74 Set/Read Von mode. 0EH/0FH
Byte Description
1 AAh
2 Address (0-31, 0XFF)
3 Command 0EH/0FH
4 Von mode (0:Living 1:Latch)
5-25 Reserved
26 Check sum
12.75 Set/Read Von value. (10H/11H)
Byte Description
1 AAh
2 Address (0-31, 0XFF)
3 Command 10H/11H
4 Von value (Low byte to High byte order)
5-25 Reserved
26 Check sum
NOTE: Receiving one frame command and verify them
If verify sum is wrong, return the parameter 90H
If setting parameter is wrong or over brim, return parameter A0H.
If command is not enforce, return to parameter B0H
If command is invalid, return to parameter C0H
Otherwise, return to parameter 80H
NOTE: Receiving one frame command and verify them
If verify sum is correct, return the relative reading data
If verify sum is wrong, return the verify command (90H)
Version: July 23, 2019
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com

BK Precision 8500B Series Specifications

General

Brand	BK Precision
Model	8500B Series
Category	Test Equipment
Language	English