BK Precision 8500B Series Programming Manual

13
3.4 STATus:OPERation[:EVENt]?
This command query the query operation event register values. The event register is read-only register, which holds
(latches) all value passed by the NTR and, or PTR lter. Read channel operation event register will clear it.
Query Syntax STATus:OPERation[:EVENt]?
Parameters None
Example STAT:OPER:EVEN?
Query Response <NR1>
Related Commands *CLS
3.5 STATus:OPERation:CONDition?
This query returns the value of operation condition register. That is a read-only register that holds the real-time
(unlatched) operational status of the electronic load.
Query Syntax STATus:OPERation:CONDition?
Parameters None
Example STAT:OPER:COND?
Query Response <NR1>
Related Commands STAT:QUES:COND?
3.6 STATus:OPERation:ENABle <NRf+>
The command is used to set the value of operations enable register. This register is a mask for enabling specic bits
from the Operation Event register to set the operation summary bit (OPER) of the Status Byte register. The operation
summary bit is the logical OR of all enabled Operation Event register bits.
Command Syntax STATus:OPERation:ENABle <NRf+>
Parameters 0 to 65535
Default Value 0
Example STAT:OPER:ENAB 32
Query Syntax STATus:OPERation:ENABle?
Query Response <NR1>
Related Commands STAT:OPER?
Default Value 0

BK Precision 8500B Series Specifications

General

Brand	BK Precision
Model	8500B Series
Category	Test Equipment
Language	English