BK Precision 8500B Series - Operation Modes; 6.1 Static Modes

32
Example DYN:SLEW:FALL 3
Query Syntax [SOURce:]DYNamic:SLEW:FALL?
Query Response <NR2>
7.26 [SOURce:]DYNamic:MODE <mode>
This command is used to set the working mode in dynamic mode.
Command Syntax [SOURce:]DYNamic:MODE <mode>
Parameters CONTinuous- PULSe- TOGGLe
*RST Value
CONTinuous
Example DYN:MODE PULS
Query Syntax [SOURce:]DYNamic:MODE?
Query Response <CRD>