BK Precision 8500B Series Programming Manual

62
12.70 Set/Read single-step off-load time of autotest mode. (DAH/DBH)
Byte Description
1 AAh
2 Address (0-31, 0XFF)
3 Command DAH/DBH
4 Step number
5-7 Single step off-load time (Low byte to High byte order)
8-25 Reserved
26 Checksum
12.71 Set/Read autotest stop condition. (DCH/DDH)
Byte Description
1 AAh
2 Address (0-31, 0XFF)
3 Command DCH/DDH
4 Stop condition (0:complete, 1:failure)
5-25 Reserved
26 Checksum
12.72 Set/Read autotest chain le. ( DEH/DFH)
Byte Description
1 AAh
2 Address (0-31, 0XFF)
3 Command DEH/DFH
4 Chain le number (0 repersents chain no le)
5-25 Reserved
26 Checksum
12.73 Save/Recall autotest le. (DEH/DFH)
Byte Description
1 AAh
2 Address (0-31, 0XFF)
3 Command E0H/E1H
4 File number (0 repersents do not save)
5-25 Reserved
26 Checksum

BK Precision 8500B Series Specifications

General

Brand	BK Precision
Model	8500B Series
Category	Test Equipment
Language	English