BK Precision 8500B Series Programming Manual

34
8.4 SYSTem:LOCal
The command sets the load to local mode when in RS232 mode. Can use the buttons on front panel to operate.
Command Syntax SYSTem:LOCal
Parameters None
Example SYST:LOC
8.5 SYSTem:REMote
The command sets the load to remote mode when in RS232 mode. All the buttons except for the LOCAL and Shift
buttons will lose function. In the remote state, press LOCAL key return to local mode.
Command Syntax SYSTem:REMote
Parameters None
Example SYST:REM
8.6 SYSTem:RWLock
This command can set the load to remote mode, all the button on front panel will lose function including LOCAL button.
Use SYSTem:LOCal return to local mode.
Command Syntax SYSTem:RWLock
Parameters None
Example SYST:RWL
Related Commands SYST:REM SYST:LOC

BK Precision 8500B Series Specifications

General

Brand	BK Precision
Model	8500B Series
Category	Test Equipment
Language	English