Bosch Access Easy Controller - Controller Setup

Access Easy Controller Dial-Up Networking | en 69
Bosch Security Systems Hardware Manual Ver 2.0.0 | 2006.07
10.4 Controller Setup
Dial-up networking allows a user to remotely connect to the Access Easy Controller through a
phone line. The following describes the necessary procedures to configure dial-up network-
ing.
1. Log into Access Easy Controller and select Panel Admin. The following is displayed:
2. Select Dial-in User to display the following:
3. The default Dial-in user name is 'PPP' and the default password is '8088'. For security
purposes, we suggest you change the default User Name and Password.
4. Adjust the Dial-in setting as necessary. Then click Save.