Need help?Do you have a question about the Bosch Access Easy Controller and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | Access Easy Controller |
| Category | IP Access Controllers |
| Language | English |
Details the basic configuration of the Access Easy Controller system and its components.
Describes system configurations for a single controller setup.
Details system configurations involving two controllers.
Outlines system configurations for three-controller setups.
Provides detailed hardware specifications for the controller unit.
Addresses network compatibility issues and provides solutions for unmet requirements.
Step-by-step guide for installing the Access Easy Controller hardware.
Instructions for installing the HID MiniProx reader and its functionality.
Guide for installing the HID ProxPoint reader and verifying its operation.
Details on installing the HID ProxPro reader and its functional tests.
Explains installation and operation of the HID ProxPro reader with keypad.
Procedures for installing and operating the S-Series Card Reader.
Installation and operation details for the S-Series Fingerprint Card Reader.
Wiring diagrams for field devices using the I/O board for input monitoring.
Configuration for readers acting as both access and arming/disarming devices.
Describes how all input points trigger the common alarm output.
Explains how door status triggers the common alarm output.
Details how panel AC power failure triggers the common alarm output.
Explains how controller tampering triggers the common alarm output.
Describes how a duress condition triggers the common alarm output.
Steps for configuring TCP/IP settings on a Macintosh computer.
Special guidelines for UL compliant dial-up installations.
Instructions for installing the modem for dial-up networking.
Details on configuring modem switch settings for proper operation.
Security features and default settings for dial-in access.
Procedures for setting up the controller for dial-up networking.
Explanation of how IP addresses are handled during dial-up connections.
Steps to modify the dial-in IP address if conflicts arise.
Guide to setting up a Windows PC for dial-up connection to the controller.
Guide to setting up a Macintosh PC for dial-up connection to the controller.
How to manage simultaneous LAN and dial-up connections.
Steps to configure a web browser on Windows for controller access.
Steps to configure a web browser on Macintosh for controller access.
Steps to restore the controller's database from a Windows computer.
Identifies physical components and layout of the CPU card.
Describes other components on or related to the CPU card.
Shows the layout and components of the 4-Reader and 8-I/O boards.
Technical details about the 4-reader board, including connectors and functions.
Technical overview of the 8-Input/Output board, including inputs and outputs.
Details on setting addresses for Reader and I/O boards using jumpers.
Shows the physical connectors on the Secure/Communication Card.
Provides a technical overview of the Secure/Communication Card's functions.
Explains the status indicated by LEDs on the Secure/Communication Card.
Describes the 18V AC input power supply for the main controller.
Technical overview of the 18VAC input power supply card's functions.
Describes the 18V AC power supply card for the Access Easy Extension unit.
Technical overview of the 18VAC PSU card for the extension unit.
Describes the 15V DC input power supply for the main controller.
Technical overview of the 15VDC input power supply card's functions.
Describes the 15V DC power supply card for the Access Easy Extension unit.
Technical overview of the 15VDC PSU card for the extension unit.
Shows the physical connectors and layout of the Convertor Card.
Technical overview of the Convertor Card's functions and connections.
Explains how to set jumpers on the Convertor Card for configuration.
Describes the LED indicators on the Convertor Card for diagnostics.
Details the average current consumption of various controller cards.
Explains power connections for the main controller unit.
Details power connections for the Access Easy Extension unit.
Shows typical keypad layouts for card reader units.
Explains the functions of keys on card reader keypads.
Details procedures for entering and exiting controlled areas using keypads.
Describes other uses of the card reader, such as time clock functions.
Steps for changing the PIN code on a card reader.
Configuration and LED indicators for readers used for arming/disarming.
Verifies controller compatibility with the customer's network environment.
Checks if the controller's basic hardware and LEDs are functioning correctly.
Tests direct connectivity between the controller and a technician's computer.
Confirms correct network settings on the controller for the customer's network.
Checks the proper wiring of the network jack or hub connection.
Uses the ping command to validate network configuration and connectivity.
Verifies technician's computer can ping customer's network components.
Reconnects controller and tests ping command from customer's computer.
Verifies controller accessibility via a web browser after reconnection.
Attempts to log on to the controller to confirm resolution.
Addresses issues related to failed login attempts, including wrong credentials.
Troubleshoots "You are stranger!" error message, often related to browser cookies.
Addresses issues with applet loading or not loading during login.
Troubleshoots the "No such user name" error message during login.
Addresses incorrect password entries and potential causes.
Answers common questions about system monitoring and operation.
Addresses questions regarding battery backup, expansion chassis, and tamper alarms.
Answers questions about reader cable length and reader operation issues.
Discusses monitoring doors without readers and connecting glass break detectors.
Addresses questions about concurrent computer connections and cable lengths.
Shows the RJ45 plug, cable type, and recommended jacket insulation.
Instructions on how to cut and strip the cable jacket insulation.
Provides the standard color code for RJ45 plug arrangements.
Step-by-step procedure for terminating modular plug cable assemblies.
Guide to determining battery size based on hardware and current consumption.
Provides an example calculation for choosing the correct battery size.
Detailed wiring diagram for the main controller unit (UL Listed System).
Detailed wiring diagram for the main controller unit (CE Listed System).
Instructions on how to test the functionality of the GSM modem.
To Next Page
