Bosch Access Easy Controller User Manual

80 en | Configuring a Web Browser to Work with Access Easy Controller Access Easy Controller
Ver 2.0.0 | 2006.07 Hardware Manual Bosch Security Systems
12. Enter the Access Easy Controller's IP address in the browser's Address box as shown
above.
13. Press the Enter key or click . This should display the Access Easy Controller's login
page.
14. Proceed to login using the default user id: USER1 and password: 8088. Upon successful
login, the controller's home page will be displayed.
15. From the home page, select Panel Admin, Panel Setup. The Network Settings page
should be displayed. Make any needed changes to configure the controller for operation
on the customer's network. Click Save to store the changes.
16. After the database has been saved, reboot the controller. It will now boot using the new
IP address. The controller is now ready to be connected to the customer's network.
i
NOTICE!
For detailed information on database configuration, refer to the Access Easy Controller Soft-
ware User Manual.

Bosch Access Easy Controller Specifications

General

Brand	Bosch
Model	Access Easy Controller
Category	IP Access Controllers
Language	English