D9412GV4/D7412GV4/D7212GV4 Panel and Area Wide Parameters | en 107
Bosch Security Systems, Inc. Program Entry Guide F.01U.218.312 | 04 | 2012.03
L## Cycle Door
Cycle Door (Menu Function only)
To cycle the doors, press number [1] through [8] on the keypad, corresponding to the door
number. For example, pressing [2] and [ENTER] cycles door number 2, which is indicated by
C in the display. Refer to Cycle Door in Table 3.18, Page 108.
Cycle Door allows the user with this authority level to access the CYCLE? 12345678 keypad
display.
L## Unlock Door
To unlock or relock a door, press number [1] through [8] on the keypad, corresponding to the
door number (refer to “Unlock Door” in Table 3.18, Page 108). For example, pressing [2] and
[ENTER] unlocks door number 2. The display indicates “U’ (for unlock door) with the door
number. Select the same door number again and press [ENTER] to relock the door.
Unlock Door allows the user with this authority level to access the UNLOCK? 12345678
keypad display.
L## Secure Door
Press number [1] through [8] on the keypad, corresponding to the door number to secure or
unsecure a door (refer to “Secure Door” in Table 3.18, Page 108).For example, pressing [2]
and [ENTER] secures door number 2, which is indicated by an X in the display.
Secure Door allows the user with this authority level to access the SECURE? 12345678
keypad display.
Default: Authority Levels 1-2, 15: Enabled (E)Authority Levels 3-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
(None) Cycle Door (Menu function only)
This feature is not available with the D7212GV4. Keep the default setting.
Default: Authority Levels 1-2, 15: Enabled (E)Authority Levels 3-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
(None) Cycle Door (Menu function only)
This feature is not available with the D7212GV4. Keep the default setting.
Default: Authority Levels 1-2, 15: Enabled (E)Authority Levels 3-14: Blank (-)
Selection: - or E
Function No. Function Name Alternate Keystroke
(None) Secure Door (Menu function only)
This feature is not available with the D7212GV4. Keep the default setting.