Bosch D7412GV4 - Service Bypass Menu; RF Points Menu

14 en | Introduction D9412GV4/D7412GV4/D7212GV4
F.01U.218.312 | 04 | 2012.03 Program Entry Guide Bosch Security Systems, Inc.
2.5.2 Service Bypass Menu
2.5.3 RF Points Menu
D1255 Service Bypass Menu
99 [ENT] [NEXT] or [PREV] TOOLS MENU [ENT] ENTER PASSCODE (Installer) [ENT]
SERVICE BYPASS [ENT] (Refer to Page 204.)
NOTICE!
Press [NEXT] to move through the list of bypassed points (when points are bypassed).
Press [ESC] to exit to the previous level.
D1260 Service Bypass Menu
99 [ENTER] [Next] Tools Menu [ENTER] Enter Passcode (Installer) [ENTER]
Service Bypass [ENTER] (Refer to Page 204.)
NOTICE!
Press the Next softkey to move through the list of bypassed points (when points are bypassed).
Press [Exit] to exit to the previous level.
D1255 RF Points Menu
99 [ENT] [NEXT] or [PREV] TOOLS MENU [ENT] ENTER PASSCODE (Installer) [ENT]
RF POINTS [ENT]
Refer to Page
ENROLL RF POINT [ENT].........................................................................
205
REPLACE RF POINT [ENT].......................................................................
205
REMOVE RF POINTS [ENT]......................................................................
206
NOTICE!
Press [NEXT] or [PREV] to move through the RF POINTS menu and submenus.
Press [ENT] to open a menu or submenu.
Press [ESC] to exit to the previous level.
D1260 RF Points Menu
99 [ENTER] [Next] Tools Menu [ENTER] ENTER PASSCODE (Installer) [ENTER]
RF Points [ENTER]
Refer to Page
Enroll RF Point [ENT].........................................................................
205
Replace RF Point [ENT].......................................................................
205
Remove RF Points [ENT]......................................................................
206
NOTICE!
Press the Next softkey to move through the RF Points menu and submenus.
Press [ENTER] to open a menu or submenu.
Press the Exit softkey to exit to the previous level.