Bosch D7412GV4 - Points; What is a Point?; Controlled Points

D9412GV4/D7412GV4/D7212GV4 Introduction | en 13
Bosch Security Systems, Inc. Program Entry Guide F.01U.218.312 | 04 | 2012.03
D1260 Keypad Programming Menu
99 [ENTER] [Next] Tools Menu [ENTER] ENTER PASSCODE (Installer) [ENTER]
Programming
Refer to
Page
NOTICE!
To move
through the
Programming
menu and
submenus, press
the Next softkey.
To open a
menu or submenu,
press [ENTER].
To exit to the
previous level,
press the Exit
softkey.
To send saved
changes to the
control panel,
exit from
Programming
mode.
Phone Numbers [ENTER]
Phone 1-4.................................................................. 17
Phone Parameters [ENTER]
Phone 1-4.................................................................. 19
Enhanced Comm [ENTER]
40
Communications....................................................
40
Select IP Path Path 1-4............................
40
IP Module Config [ENTER]
B420 Module (1-2)
Module Parameters
DHCP Enable..
180
UPnP Enable..
184
Address Parameters
IP ADDRESS...
180
Subnet Mask..
181
Default
Gateway.............
182
Port Number..
184
DNS Parameters
Server
Address..............
183
Module
Hostname..........
186
Encryption
AES Key Size..
185
AES
Encryption Key...
185
Routing [ENTER]
Route Group 1-4....................................................... 30
RPS Parameters [ENTER]
RPS Passcode.......................................................
55
RPS Phone Number...............................
58
RPS IP Address.....................................
41
RPS IP Port...........................................
48
Area Parameters [ENTER]
Area Number 1-32.....................................................
(1 - 8 for D7412GV4)(1 - 4 for D7212GV4)
61
Command Center [ENTER]
CC Number 1-16...................................................... 80 and
81
User Passcode [ENTER]..............................................................................................
126
Point Parameters [ENTER]
PT NUM 1-247..........................................................
(1-75 for D7412GV4)(1-40 for D7212GV4)
146
Disable Keypad Programming [ENT]...........................................................................
101