D9412GV4/D7412GV4/D7212GV4 Panel and Area Wide Parameters | en 89
Bosch Security Systems, Inc. Program Entry Guide F.01U.218.312 | 04 | 2012.03
A blank entry disables the ACCOUNT IS ON display for this area. An account wide area shows
the AREA # IS ON text instead of the ACCOUNT IS ON text.
Unique ACCOUNT IS ON Text
Each area can have unique ACCOUNT IS ON text, or you can program the same text in each
area of the account so when all the areas in the account are armed, they all show the same
text.
D1260 Series Keypad
Although it is not programmed in this area, the D1260 Series keypad can display up to sixteen
characters for an Area Name on line 1 of its display. The Area Text (Area # Is Off, Area # Not
Ready, Area # Is On, and Account # Is On) programmed in this module appears on line 2 of
the D1260 Alpha V Keypad. When programming custom text, it should be logical to users
viewing it on the D1260. For example, the Area Name Text can be programmed to display
Front Office and the Area # Is Off text (programmed in this section) could be programmed to
display Ready To Arm. The D1260 would then show on line 1 Front Office and on line 2, Ready
To Arm.
Area# Name Text
3.11.3 Custom Function
Use custom functions to simplify complex keystroke sequences entered at the keypad. These
items are similar to speed dialing on a telephone. When the custom function appears on the
keypad, a user can execute a request by pressing [ENTER]. You can have up to sixteen custom
functions and restrict their use by area and authority level.
Each Custom Function ### item has sixteen characters of programmable text (CF### Text).
When the Custom Function is assigned to the menu M## Function (refer to
Section 3.13 Function List, page 116) the user can press [PREV] or [NEXT] to scroll to CF###
Text. The user accesses the menu by pressing [MENU] on the keypad.
The user needs the appropriate authority level enabled for the L## C Function 128 to 143 in
Section 3.12 User Interface, page 93, to use the custom function.
Consider the scope of the keypad used to access the Custom Function. Each Custom Function
is enabled in the function menu by M## CC Address 1 [through 8] (refer to Section M## CC
Address 1 [through #], page 117). If the Custom Function is not assigned to a specific keypad
address, it does not appear in the menu.
Custom Function
Enter the Custom Function number you want to program. You can program up to sixteen
Custom Functions, which are numbered 128 to 143.
Default: Refer to the program record sheet
Selection: Sixteen alphanumeric characters
Enter the text for this area's name. This text only displays on the D1260 series keypads.
Default: Blank
Selection: Blank, 128 to 143 (on D9412GV4), 128 to 131 (on D7412GV4/
D7212GV4)
NOTICE!
Custom Functions 132 through 143 are not available with the D7412GV4 and D7212GV4.
To Next Page
Loading...
