90 en | Panel and Area Wide Parameters D9412GV4/D7412GV4/D7212GV4
F.01U.218.312 | 04 | 2012.03 Program Entry Guide Bosch Security Systems, Inc.
CF### Text
Determines the menu text displayed at the keypad for the custom function item. Use this text
to represent the functions performed by this menu item.
CF### Key Strokes
The keystrokes simulate any sequence of keystrokes the user can perform at a keypad. You
can program up to 32 keystrokes for each Custom Function.
Default: Blank
Selection: Sixteen alphanumeric characters. See Section 3.11.2 Area Text, page 88
for valid character entries.
NOTICE!
Custom Functions 132 through 143 are not available with D7212GV4.
Default: Blank
Selection: Up to 32 characters: 0 to 9, A, B, C, D, EBlank = disabled.
Selection: D1255 Key D1255 Faceplate
Label
D1260 Key
0 to 9 0 to 9 0 to 9
A [COMMAND] [COMMAND*]
B[PREV]
(previous)
NA
C[ESC]
(escape)
MENU NA
D[NEXT] NA
E [ENT](Enter) YES [#ENTER]
C1* NA (softkey 1)
C2* NA (softkey 2)
C3* NA (softkey 3)
C4* NA (softkey 4)
C5* NA (softkey 5)
C6* NA (softkey 6)
C7* NA (softkey 7)
C8* NA (softkey 8)
* Softkey selections are stored as two keystrokes
To Next Page
Loading...
