D9412GV4/D7412GV4/D7212GV4 Schedules (Skeds) | en 163
Bosch Security Systems, Inc. Program Entry Guide F.01U.218.312 | 04 | 2012.03
UW# Sunday
This prompt, and the next six day of the week prompts, select the days of the week that the
User Group Window is active.
UW# Monday
UW# Tuesday
UW# Wednesday
UW# Thursday
UW# Friday
UW# Saturday
UW# Group Enable Time
Enter the time of day when the window starts. Beginning at this time, users assigned to this
window’s group can use their passcodes. The window goes into effect at the beginning of the
minute. Make entries using a 24-hour clock (for example, 7:00 AM is entered as 07:00, 2:45
PM is entered as 14:45).
If the window must activate on the same day that you program it, reboot the control panel to
activate it immediately.
UW# Group Disable Time
Default: No
Selection: Yes or No
NOTICE!
Refer to Section W# Sunday, page 154 for more information about programming this prompt.
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Default: 00:00
Selection: HH:MM (hours and minutes)
NOTICE!
This prompt must be programmed if this User Group Window is assigned to a user group.
Default: 00:00
Selection: HH:MM (hours and minutes)
To Next Page
Loading...
