172 en | Schedules (Skeds) D9412GV4/D7412GV4/D7212GV4
F.01U.218.312 | 04 | 2012.03 Program Entry Guide Bosch Security Systems, Inc.
This prompt and the next six prompts select the days of the week when the sked is active.
Exceptions:
To prevent the sked from activating on certain days of the year, program Xept Holiday as Yes,
and enable at least one Holiday Index. When Xept Holiday is programmed as Yes, the window
executes on the days of the week programmed unless the date is designated as a holiday by
the Holiday Index selected.
If a sked is only needed on certain days of the year, do not program the sked to execute on
specific days of the week. Instead, program Xept Holiday as No, and select a Holiday Index
with the dates you want the window to be active.
S## Monday
S## Tuesday
S## Wedsday
S## Thursday
S## Friday
S## Saturday
S## Xept Holiday
If no days of the week are programmed, this sked operates only on the holidays programmed
in the Holiday Index(es) used with this sked. This sked also operates if the holiday falls on a
day of the week that is programmed.
S## Holiday #
NOTICE!
To meet UL 864 requirements for Central Station and Remote Station applications (D9412GV4
and D7412GV4), program each day of the week to Yes for the required Test Report Sked.
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Default: No
Selection: Yes or No
Yes Prevent this sked from operating on the holidays identified in the
specific Holiday Index(es) used with this sked. Specific Holiday Indexes
are selected in this programming section and programmed in the next
programming module.
No This sked operates on holidays programmed in the Holiday Index(es)
used with this sked.
Default: No
Selection: Yes or No
To Next Page
Loading...
