194 en | SDI2 Modules D9412GV4/D7412GV4/D7212GV4
F.01U.218.312 | 04 | 2012.03 Program Entry Guide Bosch Security Systems, Inc.
4. Press [NEXT]. Within the SIGNAL STRENGTHS option, the menu will scroll through the
following sub-categories, with the results of the diagnostic check:
–STRENGTH
–LEVEL
–MARGIN
D1260
1. Refer to Section 2.5.1 Keypad Programming Menu, page 12 to access the Tools Menu and
navigate to the RF Diagnostics option.
2. Press [ENT] to enter the RF Diagnostics option.
3. Press [ENT] to enter the Signal Strengths option.
4. Press the Next softkey. Within the Signal Strengths option, the menu will scroll through
the following sub-categories, with the results of the diagnostic check:
– Signal Strengths
– Level
–Margin
RF Repeaters - States
D1255
1. Refer to Section 2.5.1 Keypad Programming Menu, page 12 to access the TOOLS MENU
and navigate to the RF DIAGNOSTICS option.
2. Press [ENT] to enter the RF DIAGNOSTICS option.
3. Press [ENT] at the RF REPEATERS option to enter it.
4. Press [ENT] to enter the STATES option.
5. Press [NEXT]. Within the STATES option, the menu will scroll through the following sub-
categories, with the results of the diagnostic check:
–TROUBLE
– MISSING
–TAMPER
– LOW-BATTERY
–AC FAIL
D1260
1. Refer to Section 2.5.1 Keypad Programming Menu, page 12 to access the Tools Menu and
navigate to the RF Diagnostics option.
2. Press [ENTER] to enter the RF Diagnostics option.
3. Press [ENTER] at the RF Repeaters option to enter it.
4. Press [ENTER] to enter the States option.
5. Press the Next softkey. Within the States option, the menu will scroll through the
following sub-categories, with the results of the diagnostic check:
– State
– Missing
–Tamper
– Low-Battery
–AC FAIL
To Next Page
Loading...
