DS7200V2-EXP | Installation Guide | 4. Reference Materials
EN | 112
Bosch Security Systems, Inc. | 04/12 | F01U253045-02
Table 40: Control Panel Events and Reporting Formats (continued)
Event as shown
in Control Panel
Log
Zone Types
Linked to
Event
51 Cls,Prt,+Dly,RPS CQ Remote
Closing
456 Partial
Arm
System armed Perimeter Only
with Entry/Exit Delay by RPS.
52 Cls,Prt,+Dly,Usr CL Closing
Report
456 Partial
Arm
System armed Perimeter Only
with Entry/Exit Delay by User.
10
53 Cls,Prt,-Dly,RPS CQ Remote
456 Partial
System armed Perimeter Only
with no delay (instant) by RPS.
Report
Arm
System armed Perimeter Only
with no delay (instant) by User.
55 Frc,All,+Dly,Skd CF Forced
Closing
403 Automatic
O/C
System forced All On with
Entry/Exit Delay by Sked.
10
56 Frc,All,+Dly,KS CF Forced
Closing
400 O/C System forced All On with
Entry/Exit Delay by Keyswitch.
10
57 Frc,All,+Dly,RPS CF Forced
Closing
400 O/C System forced All On with
Entry/Exit Delay by RPS.
58 Frc,All,+Dly,Tel CF Forced
400 O/C System forced All On with
Entry/Exit Delay by Telephone.
10
Closing
User
System forced All On with
Entry/Exit Delay by User.
60 Frc,All,-Dly,RPS CF Forced
Closing
400 O/C System forced All On with no
delay (instant) by RPS.
61 Frc,All,-Dly,Usr CF Forced
Closing
401 O/C by
User
System forced All On with no
delay (instant) by User.
10
62 Frc,Prt,+Dly,Skd NF Forced
Perimeter Arm
456 Partial
Arm
System forced Perimeter Only
with Entry/Exit Delay by Sked.
10
63 Frc,Prt,+Dly,KS NF Forced
Perimeter Arm
456 Partial
Arm
System forced Perimeter Only
with Entry/Exit Delay by
10
64 Frc,Prt,+Dly,RPS NF Forced
Perimeter Arm
456 Partial
Arm
System forced Perimeter Only
with Entry/Exit Delay by RPS.
65 Frc,Prt,+Dly,Usr NF Forced
Perimeter Arm
456 Partial
Arm
System forced Perimeter Only
with Entry/Exit Delay by User.
10
66 Frc,Prt,-Dly,RPS NF Forced
Perimeter Arm
456 Partial
Arm
System forced Perimeter Only
with no delay (instant) by RPS.
67 Frc,Prt,-Dly,Usr NF Forced
Perimeter Arm
456 Partial
Arm
System forced Perimeter Only
with no delay (instant) by User.
10
68 Reserved
69 Comm Fail YC
Communications
Fail
354 Failure to
communicate
event
Report failed to reach routing
destination.
12 R S
70 CommFail,AltCom
m
YC
Communications
354 Failure to
communicate
Report failed to reach routing
destination configured for
12 R S
Communications
Restoral
communicate
event
After communication fail, report
sent successfully to routing
destination.
72 CommRstl,
AltComm
YK
Communications
Restoral
354 Failure to
communicate
event
After communication fail, report
sent successfully to routing
destination configured for
Alternate Communication.
12 R S
73 Date/Time Change JT Time
Changed
625
Time/Date
reset
Date/Time in panel changed. 12 R