124
4.14 Operation of CapacityTester
4.14 Operation of CapacityTester
Software update for CapacityTester
1. Click on the "Configuration" menu.
2. Click the button with the green arrow.
3. The update process starts.
4. The current parameters of the CapacityTester (Serial
number, Hardware version and Software version)
are displayed below the button with the green
arrow.
Before operating, please pay attention to the
safety instructions in the Capacity Tester operat-
ing instructions!
The device converts the energy released by the
battery into heat (there are heat sinks and cool-
ing fans installed in the device's interior).
X Make sure that the air intake and outlet vents
are not blocked.
X Place the battery being tested beside the
CapacityTester and not in front of or behind it.
X Protect device against exposure to direct
sunshine.
It is forbidden to open the device. Opening the
device will void the warranty.
To Next Page