Edition Release
date
Notes
04 2019-09 Changes in comparison to previous edition:
New contents
● KLC03: DC bus capacitor unit
● KMV03: new variants with different cooling type
● KNK03: new variants with different cooling type
● KMS02:
– new variant with single-cable connection (KMS02.1B-xxxx-x-xx-xx-ENA-xx-xx-xx)
– new variant with angular connector (KMS02.1B-xxxx-x-xx-xx-xxx-xx-WN/WT/WE-xx)
fig. 5-21 "Dimensions (with angular connector for motor and encoder connection)" on
page 85
● KSM02.1B-041C-xxx-xx-xxx-xx-xx-xx-AE/AN/AT-xx (ATEX design):
included dimensional drawing: fig. 5-12 "KSM02.1B-041C dimensions (ATEX design)" on
page 74
● HAS05.1-021: Hybrid joint
● HAS05.1-023: HCS01 adapter
● HAS05.1-024: Passive 42 V supply unit
● RKH09xx: Hybrid cable with circular connector
● RH2-030: Hybrid cable KMS02 - MS2N
● Sizing mains filters for drive systems with IndraDrive Mi/C/M/Cs
● System type plate for modules of configured variants
● Two-piece connection cover for KMV03, KNK03, KLC03, KMS03
Modified contents
● KSM02 type code
● KMS02 type code
● KMS03 type code
● KMV03 type code
● KNK03 type code
● RKB0011 replaced by RKB0021
● External communication (X118, X119) described in greater detail
Tab. 1-15: Editions
26/407
System presentation
IndraDrive Mi Drive Systems with KCU02, KSM02,
KMS02/03, KMV03, KNK03, KLC03
Bosch Rexroth AG R911335703_Edition 04
To Next Page