Boss RC-50 - Main Specifications

100
Main Specifications
RC-50: Loop Station
AD Conversion
24 bit
DA Conversion
24 bit
Sampling Frequency
44.1 kHz
Program Memories
99
Nominal Input Level
INST: -10 dBu
MIC: -50 dBu
AUX: -16 dBu
Input Impedance
INST: 1 M Ω
MIC: 1 k Ω
AUX: 100 k Ω
Nominal Output Level
MAIN OUTPUT: -10 dBu
SUB OUTPUT: -10 dBu
Output Impedance
MAIN OUTPUT: 2 k Ω
SUB OUTPUT: 2 k Ω
PHONES: 47 Ω
Available Recording Time
STEREO: Approx. 24 minutes
MONO: Approx. 49 minutes
* The times listed above take into account the amount of memory needed
for the actual recording combined with the memory required for the
RC-50’s operations (e.g., Undo/Redo).
Control
<Front Panel>
REC/PLAY/OVERDUB pedal
STOP pedal
TEMPO pedal
UNDO/REDO pedal
PHRASE 1 pedal
PHRASE 2 pedal
PHRASE 3 pedal
PATCH/VALUE dial
PARAMETER buttons ( / )
TAP TEMPO button
NAME/PATCH button
CTL/EXP PEDAL button
SYSTEM/USB button
EXIT button
WRITE button
PLAY MODE button
LOOP SYNC button
AUTO REC button
INPUT MODE button
OVERDUB MODE button
LOOP QUANTIZE indicator
OVERDUB MODE indicators
(OVERDUB, REPLACE, MOMENTARY PUNCH-IN)
(PHRASE EDIT)
PHRASE LEVEL knobs (PHRASE 1, 2, 3)
PHRASE buttons (PHRASE 1, 2, 3)
REVERSE indicators (PHRASE 1, 2, 3)
ONE SHOT indicators (PHRASE 1, 2, 3)
(GUIDE)
LEVEL knob
SELECT button
START/STOP button
(INPUT LEVEL)
AUX knob
MIC knob
INST knob
PEAK indicator
(MASTER)
LEVEL knob
<Rear Panel>
PHANTOM switch
POWER switch
Display
16 characters, 2 lines (backlit LCD)
2 characters, 7 segment LED
RC-50_e.book 100 ページ ２００９年４月１０日 金曜日 午後１時１７分