Chapter 7
Other Functions
67
Chapter 7 Other Functions
Checking the Remaining
Recording Time
The RC-50 features about 250 MB of built-in memory for saving patches and recording, and the amount of
recording time that remains available will vary depending on the length of the phrases in the saved
patches.
The available recording time is indicated in the lower part of the right display when the Play screen is
displayed.
About the Available Recording Time
With the RC-50, you can change the recording mode (p. 48) to record for more extended periods, and
record with the RC-50 switched to stereo or mono mode.
When all of the RC-50’s patches are blank, the available recording time in each recording mode is as
shown below.
The times listed above take into account the amount of memory needed for the actual recording
combined with the memory required for the RC-50’s operations (e.g., Undo/Redo).
Recording Mode
Available Recording Time
STEREO
Approx. 24 minutes
MONO
Approx. 49 minutes
RC-50_e.book 67 ページ 2009年4月10日 金曜日 午後1時17分