Boss RC-50 - Problems with USB

92
Troubleshooting
Patches not switching
❒
Is something other than the Play screen appearing in the display?
→ With the RC-50, you cannot switch patches while any screen
other than the Play screen is displayed. Press [EXIT] to return to
the Play screen (p. 18).
Recording/overdubbing stops before finishing
❒ Is there insufficient memory remaining?
→ If memory is insufficient, initialize any unneeded patches (p. 44)
before recording or overdubbing.
❒ Is Loop Sync set to ON in Multi mode?
→ When recording with Loop Sync set to ON, once the end of the
longest phrase is reached, the RC-50 automatically switches to
overdubbing.
“Playing Back Phrases with All Lengths and Beginnings
Aligned: Loop Sync” (p. 28)
Recording starts immediately when Auto Start
is set to ON
→ If large amounts of noise are being introduced by distortion
effects or other effects processors connected to the input jack, it
may be that recording is being triggered by that noise. Reduce
the noise, for example by lowering the distortion level.
Unable to overdub
❒ Is the phrase set to ONE SHOT (p. 52)?
→ You cannot overdub to phrases set to ONE SHOT. If you want
to overdub, change the ONE SHOT setting to LOOP.
Playback tempo not changing
❒ Is recording or overdubbing in progress?
→ You cannot change the tempo during recording or overdubbing.
Change the tempo while the performance is stopped or being
played back.
❒ Is Tempo Sync set to ON in the phrase?
→ When Tempo Sync is not set to ON in a phrase, the playback
speed does not change even if the patch tempo is changed. To
match the playback speed to the patch tempo, set the phrase’s
Tempo Sync setting to ON.
“Synchronizing Playback of the Phrase to the Patch Tempo
(Tempo Sync)” (p. 53)
MIDI messages not being transmitted/received
❒ Could there be a short in the MIDI cable?
→ Try replacing the MIDI cable.
❒ Is the external MIDI device properly connected?
→ Check the connections to the external MIDI device.
❒ Are the MIDI channels matched to those of the external MIDI
device?
→ Confirm that both devices are set to the same MIDI channels.
(p. 75)
❒ If transmitting from the RC-50, have you made the necessary
settings for transmission?
→ Check the Program Change Message Transmit ON/OFF (p. 75)
and Control Change Message Transmit ON/OFF (p. 75)
settings.
Unable to communicate with computer
❒ Is the USB cable properly connected?
→ Check the connection.
❒ Is the OS compatible with the RC-50?
→ Confirm the OS used by the computer. (p. 80)
Unable to import WAV file
❒ Are the file name and format of the WAV file correct?
→ Confirm the file name and format of the WAV file. (p. 81)
Problems with Operation
Problems with USB
RC-50_e.book 92 ページ ２００９年４月１０日 金曜日 午後１時１７分