Bowa ARC 400 - Page 50

5 Operation
50 Operating Manual ARC 400 BOWA-IFU-11779-ARC400-V2.1.0-S0-EN
Save current program on Dr. Dongle:
The program currently loaded in ARC 400 can be saved on Dr. Dongle:
1. In the overview, select a program storage space to be overwritten.
2. Press “save” to save the currently loaded program at the selected
space.
3. A keyboard appears which can be used to enter a name for the
program.

The program is now saved on Dr. Dongle.
4. Press the "back" button to return to the main screen.
 Dr. Dongle can now be removed
If the Dr. Dongle is plugged in, the Dr. Dongle screen is displayed after
you touch the program name, “Program” or “Save program”.
Load a program from Dr. Dongle:
A program saved on Dr. Dongle can be loaded onto any ARC 400:
1. Select a program saved on Dr. Dongle from the overview by touching
the program name.
2. Press "load" to load the selected program.
- or-
Press "back" to return to the main screen without carrying out
changes to the selection.

The selected program is now active in the main screen of ARC 400.
 Dr. Dongle can be removed
- or-
Save the loaded program in the program list, see "Save program"
dialog, page 86.