Bowa ARC 400 - Mode Overview

5 Operation
54 Operating Manual ARC 400 BOWA-IFU-11779-ARC400-V2.1.0-S0-EN
5.5. Mode overview
An overview of the programs that can be executed with the HF device is
shown below.
5.5.1. Monopolar modes
Cutting
mode icon
Designation
Coagulation
mode icon
Designation
Standard
Moderate
Micro
Forced non cutting
Dry
Forced mixed
MetraLOOP
Forced cutting
Resection
Spray
Laparoscopy
Laparoscopy
Argon*
Argon*
GastroLOOP 1
Argon flexible*
GastroLOOP 2
Argon flex. pulse*
GastroLOOP 3
Gastro Coag
* These modes can only be used in connection with the argon
coagulation unit ARC PLUS (900-001).