108
Installation & Connection
How to install
01
01 Unpack the GIFT BOX.
02 Detach the unit from the Half Sleeve.
03 Remove the safety screw for
Transporting which is on the top of
the unit.
*
Transporting which is on the top of
the unit.
*
Remove the protection unit
(support panel).
(Sticker : "You must remove it before
you install" )
Helf Sleeve
04 Front dash board
Helf Sleeve
05 Source the half sleeve by bending the
metal Tabs. downward
06 Insert the into Dash Board.
07 Install the set and then install the
Trim Plate (option).
Bord
Bord
Screw
To Next Page
Loading...