110
Installation & Connection
How to disassemble
01
Insert the 'Set Key' into the slot between dash board and of
the both side of the unit, left and right.
01
Insert the 'Set Key' deeply into the centerslot of left and
right hand side of the unit.
02
Insert the 'Set Key' deeply into the centerslot of left and
right hand side of the unit.
03
Bord
Set Key
Bord
Bord
Set Key
Set Key
02
Unscrew the form dash board.
01
Unscrew the bracket from the left hand side and right hand
side of he unit.
02
Detach the set key from the dash board at the same time
03
Bord
Screw
Bord
Bord
Screw
To Next Page
Loading...