Braun Aesculap Acculan 4 User Manual (English)

Other manuals for Braun Aesculap Acculan 4

Questions and Answers:

C
christopher68Sep 2, 2025
How to fix an attachment that won't attach or detach on Braun Aesculap Acculan 4 Medical Equipment?
- L
  Laurie MillerSep 2, 2025
  If the attachment does not attach or detach on your Braun Medical Equipment, first ensure that the attachment is compatible with the drill. If the connection on the attachment is deformed or defective, have the manufacturer repair the attachment. If the coupling on the drill is deformed or defective, have the manufacturer repair the drill. If the sleeve on the drill is hard to move, turn and hold the drill sleeve, then attach the attachment, turning the sleeve back if necessary. As a preventative measure, lubricate the sleeve on the drill before each sterilization.
K
Kristin Keller DVMSep 3, 2025
Why is my Braun Medical Equipment making a loud running noise?
- A
  alexandra01Sep 3, 2025
  A loud running noise in your Braun Medical Equipment could be due to a defective attachment drive or ball bearings. To resolve this, follow the operating instructions for preparation and care. As a preventative measure, lubricate the attachment before every sterilization. Additionally, have the manufacturer repair the attachment.
M
mark69Sep 3, 2025
How to fix a Braun Aesculap Acculan 4 that is not running?
- T
  thaleSep 3, 2025
  If your Braun Medical Equipment is not running, there are several potential causes: * The battery may be missing; insert a battery. * The battery may not be charged; charge it in the charger. * The battery could be defective; have the manufacturer repair it. * The product might be in a locked OFF position; turn the safety catch to the ON position. * The product itself may be defective; have the manufacturer repair it.
M
Mrs. Vanessa MitchellSep 4, 2025
Why does my Braun Aesculap Acculan 4 Medical Equipment become too hot?
- S
  Susan CrosbySep 4, 2025
  If the Braun Medical Equipment becomes too hot, consider the following possible causes and solutions: * **Excessive use:** Adhere to the operating instructions, particularly regarding the operating mode. * **Incorrect reprocessing/maintenance:** Follow the operating instructions for preparation and care. As a preventative measure, lubricate the product before each sterilization. * **Fall damage or product defect:** Have the manufacturer repair the product. * **Defective attachment:** Have the manufacturer repair the attachment. * **Blunt tool:** Replace the tool.