Disassembly / Assembly SpaceStation
3
SpaceStation, 1.0 gb 3- 17
1.0
14. Loosen three screws (Abb.: 3 - 18 / Item 4) and remove
screws together with the module lock (Abb.: 3 - 18 / Item 1),
the interface board (Abb.: 3 - 18 / Item 2) and the data con-
nector holder (Abb.: 3 - 18 / Item 3) out of the housing.
Note
Note the ribbon cable length to the interface board when dis-
mounting the data connector holder. The ribbon cable must not
be kinked.
Abb.: 3 - 18
Legende zu Abb. 3 - 18:
ItemDesignation
1 Module lock
2 Interface board
3 Data connector holder
4 Screw EJOT 30x9 WN 5452 TORX 10IP A2
1
2
34
To Next Page
Loading...
