Braun SpaceStation - Page 60

Disassembly / Assembly SpaceStation
3
3- 18 SpaceStation, 1.0 gb
1.0
Disassembly
1. Loosen fours screws (Abb.: 3 - 19 / Item 1) and remove
screws together with the insulating washers (Abb.: 3 - 19 /
Item 2).
2. Press connectors F3 (Abb.: 3 - 20 / Item 2) and F4 (Abb.: 3 -
20 / Item 3) carefully out of the data connector holder
(Abb.: 3 - 20 / Item 1).
Note
The connectors F3 and F4 are integrated in the interface board.
Abb.: 3 - 19
Legende zu Abb. 3 - 19:
ItemDesignation
1 Screw EJOT 30x9 WN 5452 TORX 10IP A2S
2 Insulating washer M3
1
2
Abb.: 3 - 20
Legende zu Abb. 3 - 20:
ItemDesignation
1 Data connector holder
2 Connector F3
3 Connector F4
1
2
3