10
2.2 Product Configuration of Brinter
®
One, version 2.0
Brinter
®
One, version 2.0, is equipped with four tool sockets attached to the frame of the printer
instead of the door. These sockets are electrified and thus can keep the print heads at the set
temperature (heated or cooled). Furthermore, the design of the print heads for version 2.0 differ from
the print heads for version 1.x and hence cannot be used in the older Brinter
®
devices. Other features
of Brinter® One, version 2.0, are similar to version 1.x.
1. Tool socket rack for four print heads
2. Electrical contact surfaces of the tool sockets (NB: Never touch or put any metal objects on
the electrical contact surfaces as there is a risk of electric shock.)
The tool socket rack can be opened by pushing down the lever and turned aside to get easy
access to the print bed.
To Next Page
Loading...
Need help?
General