7
1.2 Unpacking and Assembly
The Brinter
®
One is heavy; always use a minimum of two people to unbox and
move it. Read how to safely unpack and set up your Brinter
®
One from Chapter
3.1 Setting up the Brinter
®
One Platform.
Always wear protective gloves and eye protection when using the Brinter
®
,
including UV curing and disinfection process, etc.
Always wear protective gloves and eye protection while handling hazardous
materials, including materials that are toxic, corrosive or carcinogenic.
Consult material safety data sheets, packaging labels and the manufacturer or
distributor catalog before handling hazardous dispensing materials, such as
flammable and corrosive materials. Always use appropriate protective
equipment and clothing.
After using ethanol to disinfect Brinter
®
, wait at least 60 seconds before starting
the printing process to ensure that all flammable vapors have been evaporated.
To Next Page
Loading...
Need help?
General