35
3.4.4.4 Slicing the Objects
21. Slice & Preview – After setting the slicing parameters, click slice to create and preview the G-
code.
22. Layer view – After slicing, the created layers and route planning can be viewed by moving the
slider.
23. Send print job to Brinter – Sent the created G-code to the bioprinter for printing.
24. Arrange – Return to the original unsliced object.
25. Export GCode– Produce downloadable G-code file.
26. Download – Download the created G-code on your computer.
To Next Page
Loading...
Need help?
General