BRINTER ONE User Manual

28
3.4.4.1 Setting the Print Surface
Start the slicing process by choosing the appropriate print surface for your job unless you are printing
directly on top of the print bed:
4. Add print surface – Choose the print surface positioner and print surface for your print job.
Positioners can be separately chosen for Petri dishes and well plates.
5. Print surface positioners – Add the print surface positioner for Petri dishes or well plates.
Print surface positioner for three Petri dishes placed:
4
5

BRINTER ONE Specifications

General

Brand	BRINTER
Model	ONE
Category	3D Printers
Language	English