83
Visco Tool Bio print head is delivered together with a set of 5 single-use bioprinting caps with
integrated stators [1], pistons [2] and rotors [3].
The rotor, the bioprinting cap and the piston are consumables and are available in different batch
sizes. If the cap is changed, a new rotor must also be used to guarantee a correspondingly high
material purity. Empty bioprinting caps can be stored at 15–20 °C for up to 1 year. Therefore, make
a note of the date on which the caps are stored.
To Next Page
Loading...
Need help?
General