Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 144
Broadcom Confidential and Proprietary
teste ab cd -- Enables all tests
teste -- Display enabled tests
10.131 testd
Command: testd
Description: The command disables tests. It affects nictest, regtest, pkttest, and memtest
commands. The test must starts with test group alphabet (a-d). If no number is
entered, all tests in that group are disabled.
Syntax: testd [<tests> [<tests>…]]
Example: testd a12bc -- Disable test a1, a2, and all tests in group b and c.
testd ab cd -- Disables all tests.
testd -- Display disabled tests.
10.132 asftest
Command: asftest
Description: ASF Test
Syntax: asftest
Options:
-n<DEC> iteration
10.133 bustest
Command: bustest
Description: PCI Bus Test
Syntax: bustest
Options:
-a<HEX> NIC address to DMA data to. (def=00002100)
-d<HEX> delay poll dma done polling (def=00000000)
-e<DEC> End of test case (def=259)
-g Insert debugging information
To Next Page
Loading...
Need help?
General
