Broadcom NetXtreme - Unloaddrv; Machalt; Ftq

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 153
Broadcom Confidential and Proprietary
-z Allocate memory for optimization (i.e. DOS with EFI BIOS)
-n Do not wait for link
-f Force Link to Max Speed
-T Show time stamp
-C loadd driver without PHY access
Example:
0:> loaddrv
Reinitializing PCI Configuration Space
Bus Number : 1
Device/Funtion : 11/0
Base Address : 0xfb010000
IRQ : 9
Bringing up MAC driver ... OK
PHY calculated ID: 60008162
BCM5702/03 Internal Phy Rev#2
Configuring BCM54xx ... Done
Determining Link Speed ... 1000Base-T Full Duplex
10.154 unloaddrv
Command: unloaddrv
Description: Unload NIC driver
Syntax: unloaddrv
Example:
0:> unloaddrv
Unloading MAC driver ... OK
10.155 machalt
Command: machalt
Description: Halt MAC controller
Syntax: machalt
Example:
0:> machalt
Halting MAC … OK
10.156 ftq
Command: ftq