Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 95
Broadcom Confidential and Proprietary
-m<DEC> Maximum Delay in ms (def=3000)
-n<DEC> iteration (def=1)
-p Power reset
-r Random delay
-s<DEC> Delay incremental time (us) (def=1)
10.28 seinit
Command: seinit
Description: Initialize NVRAM block.
Syntax: seinit
Options:
-i<DEC> do not restore NVRAM clock default value (def=0)
10.29 searb
Command: searb
Description: set/report current NVRAM arbitration bit. Valid arbitraion number is 0..3.
Syntax: searb [n]
10.30 seprotect
Command: seprotect
Description: set gpio pin for NVRAM write protect. Use 'none' to disable write protect
feature.
Syntax: seprotect [0|1|2|none]
10.31 selclock
Command: selclock
Description: set Legacy EEPROM clock value (bit 16-24 of EEPROM addr reg)
Syntax: selclock <8bitNewValue>
To Next Page
Loading...
Need help?
General
