Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 150
Broadcom Confidential and Proprietary
-w Disable the write DMA test
-e Disable the chip reset execution before each DMA test
-l<HEX> Number of BD sot DMA on read (0x1-0x79) (def=0xA)
10.146 binchksum
Command: binchksum
Description: Verify the checksum of each piece of firmware in the input file that contains a
complete NVRAM image.
Syntax: binchksum –f<filename>
Options:
-f<string> filename
-v<HEX> Minor revision (def=0)
-o<string> output filename
10.147 pmdcfg
Command: pmdcfg
Description: Display Power Management Info
Syntax: pmdcfg
10.148 pmpd
Command: pmpd
Description: Power Down MAC. Input file wol.txt should be found in the same location of
b57diag.exe. The input file contains patterns. If the file name is not specified, data zero will
be used.
Syntax: pmpd [filename]
Options:
-a<HEX> 1 enables ACPI Packet Match (def=00000000)
-c<HEX> 0 to add a pattern; otherwise delete (def=00000000)
-f<string> File name which contains patterns
To Next Page
Loading...
Need help?
General
