Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 102
Broadcom Confidential and Proprietary
10.47 loadfw
Command: loadfw
Description: Load Firmware to Tx/RX CPUs
Syntax: loadfw
Options:
-b<HEX> set breakpoint (0=off) (def=00000000)
-d<HEX> data pattern to be used for memory init. (def=00000000)
-f<string> filename (for bcmediag compatibility)
-i don't initialize memory before loading, def=yes
-m don't turn on CPU Trace (def=on)
-r don’t reset CPU (def=reset)
-s don't start cpu (def=start)
-t load to tx cpu, (def=rxpcu)
-v disable verbose
-m UMP firmware
-a<HEX> set address in scratch pad to load (def=00000000)
-S Scratch Pad
10.48 cpudtt
Command: cpudtt
Description: Read and display TX CPU trace (not valid for 5705)
Syntax: cpudtt <begin_addr>[- end_addr | num_bytes ]
Address range: 0x00 – 0x80
Example:
1. Read and display TX CPU trace from location 0x00 to 0x04.
0:> cpudtt 0-5
000 t0000002f c0000000 00000000 00000000 00000000 00000000
001 t00000000 00000000 00000000 00000000 00000000 00000000

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload