Broadcom NetXtreme User Manual

Broadcom NetXtreme Ethernet Adapter • Diagnostic User’s Guide
page 154
Broadcom Confidential and Proprietary
Description: Dump FTQ
Syntax: ftq
Example:
0:> ftq
***** Dump FTQ Peak/Write (Control,Full Counter, Write/Peak) *****
DMA Read FTQ (1) : 00000000 00000000 20000000
DMA High Read FTQ (2) : 00000000 00000000 60002160
DMA Write FTQ (6) : 00000000 00000000 20000000
DMA High Write FTQ (7) : 00000000 00000000 20000000
DMA Complete Dx FTQ (3) : 00000000 00000000 20000000
Send BD Comp. FTQ (4) : 00000000 00000000 20000000
Send Data Init FTQ (5) : 00000000 00000000 20000000
Send Data Comp. FTQ (9) : 00000000 00000000 20000000
Rx BD Complete FTQ (13) : 00000000 00000000 60002160
Rx Data Complete FTQ (16) : 00000000 00000000 20000000
S/W Type 1 FTQ (8) : 00000000 00000000 20000000
Host Coalescing FTQ (10) : 00000000 00000000 2000:00000000
MAC TX FTQ (11) : 00000000 00000000 2000:00000000
Mbuf Cluster Free FTQ (12): 00000000 00000000 2000:00000000
RX List Placement FTQ (14): 00000000 00000000 2000:00000000
RX Data Initiator FTQ (15): 00000000 00000000 2000:00000000
S/W Type 2 FTQ (17) : 00000000 00000000 2000:00000000
10.157 addmc
Command: addmc
Description: Add Multicast MAC
Syntax: addmc <xx:xx:xx:xx:xx:xx>
Example:
0:> addmc FF:FF:00:0A:00:00
10.158 delmc
Command: delmc
Description: Delete Multicast MAC
Syntax: delmc <xx:xx:xx:xx:xx:xx>
Example:
0:> delmc FF:FF:00:0A:00:00
10.159 txmacdes
Command: txmacdes
Description: Program Destination address to UUT
Syntax: txmacdes <xx:xx:xx:xx:xx:xx>

Broadcom NetXtreme Specifications

General

Manufacturer	Broadcom
Product Line	NetXtreme
Category	Adapter
Connector Type	RJ45
Supported OS	Windows, Linux
Features	TCP/IP Offload